Posts tagged: olivet-bible-church Archivehttps://pype.dev/tags/olivet-bible-church/archive/atom.xml2026-05-16T12:26:46ZAll posts with the tag "olivet-bible-church"Nic Paynemarkata-goOBC Networkinghttps://pype.dev/obc-networking/2026-05-16T12:26:46Z2026-05-16T12:26:46ZSpectrum brings internet in via coax to their modem. The modem feeds the Eero (acting as gateway, handing out 192.168.4.0/24). Downstream of the Eero is the...<h2 id="network"><span class="heading-wear-glyph">network</span> <a href="#network" class="heading-anchor">#</a></h2>
<p>Spectrum brings internet in via coax to their modem. The modem feeds the Eero
(acting as gateway, handing out 192.168.4.0/24). Downstream of the Eero is the
old Spectrum router still emitting an SSID on 192.168.1.0/24 — needs turning
off (requires Spectrum admin access).</p>
<h2 id="printer"><span class="heading-wear-glyph">printer</span> <a href="#printer" class="heading-anchor">#</a></h2>
<p>The printer was originally self-assigned static IP 192.168.1.165. After
switching to Eero DHCP (192.168.4.0/24), it now gets 192.168.4.25. The admin
desktop has a static rule configured for it, but the port config on the desktop
still had the old 192.168.1.165 address — had to update it to point to
192.168.4.25. The port name is stuck as IP_192.168.1.165 (couldn’t be changed).</p>
<p>The DHCP-assigned 192.168.4.25 is subject to change — need to iron that out.</p>
<h3 id="admin-password-reset"><span class="heading-wear-glyph">admin password reset</span> <a href="#admin-password-reset" class="heading-anchor">#</a></h3>
<ol>
<li>From the main menu, tap <strong>Counter</strong> → <strong>Display Keyboard</strong></li>
<li>Enter: <code>stop, 0, 0, stop, 0, 1</code> via the on-display keypad</li>
<li>A password prompt appears — enter: <code>9272 9272 9272 9272</code> (9272 × 4)</li>
<li>Tap <strong>End</strong> (this is “OK”)</li>
<li>From the new menu: <code>stop, 0</code> on the on-display keypad, then <code>C</code> on the keypad</li>
<li>This opens the admin password reset menu</li>
<li>Set new password to: <code>12345678</code></li>
</ol>
<blockquote>
<p>NOTE: I put a sticky note on the side of the printer with these instructions</p>
</blockquote>
<h3 id="how-to-get-to-network-settings"><span class="heading-wear-glyph">how to get to network settings</span> <a href="#how-to-get-to-network-settings" class="heading-anchor">#</a></h3>
<p>After the admin password reset, I navigated through the menus to find the
network settings and changed from static IP to <strong>Auto (DHCP)</strong>. Didn’t write
down the exact path — next time I’m at the printer I need to document it.</p>
<h2 id="todo"><span class="heading-wear-glyph">todo</span> <a href="#todo" class="heading-anchor">#</a></h2>
<ul>
<li><input disabled="" type="checkbox"> turn off “Olivet Bible Church” SSID on the old Spectrum router (requires admin portal access)</li>
<li><input disabled="" type="checkbox"> wall-mount Eero 2 to extend range to kid’s wing</li>
<li><input disabled="" type="checkbox"> consider getting a 4th Eero for Fellowship Hall coverage</li>
<li><input disabled="" type="checkbox"> set the printer to a DHCP reservation on the Eero so its IP doesn’t change</li>
<li><input disabled="" type="checkbox"> fix the shared password between OBC-Admin and OBC-Guest (currently the same)</li>
<li><input disabled="" type="checkbox"> re-run the damaged ethernet cable from the networking closet to the sanctuary
<ul>
<li>once done, plug blue #4 into the switch, feeding Eero 3 at the tech bar</li>
<li>Eero 3 can then feed Switch 3 for the tech bar devices</li>
<li><strong>Eero 3 might be able to do this without a new run depending on strength of their back-haul</strong></li>
</ul>
</li>
</ul>
<h2 id="topology"><span class="heading-wear-glyph">topology</span> <a href="#topology" class="heading-anchor">#</a></h2>
<figure>
<img src="https://cdn.statically.io/gh/pypeaday/images.pype.dev/main/blog-media/20260517133911_bfaa446e.png" alt="20260517133911_bfaa446e.png">
</figure>
Nic Paynehttps://pype.dev